29
ADVANCED CLEANING
For a more in-depth clean, we recommend carrying out an advanced clean every 5 routine cleaning cycles.
Evolis provides an Evolis High Trust
®
maintenance kit consisting of adhesive cards, alcohol-soaked “T” shaped cards, a cleaning pen, a box of wipes and a
specific cleaning card for your lamination module. The “T” shaped card is used to clean the transport rollers and the head of the magnetic encoder. To ensure
advanced cleaning is carried out properly, the procedure given below must be followed.
Printer servicing
NOTE
Recommended cleaning cycle: every 5 routine cleaning cycles.
Servicing accessory: alcohol-soaked “T” shaped card and adhesive card.
Follow the procedure below:
1 Open the printer cover.
2 Remove the ribbon as shown on the diagram.
3 Close the cover and check it has clicked shut.
4 Open the card feeder.
1 2 3 4
To Next Page
Loading...