Evolur aurora - CRIB ASSEMBLY - MATTRESS SUPPORT ASSEMBLY; Install Mattress Support and Positions

3
CRIB ASSEMBLY – MATTRESS SUPPORT ASSEMBLY
11
www.evolurbaby.com/help
D
3a. Attach all the corners of
Mattress Support Panel
(6) to the Footboard (1),
Left Panel (5) and Right
Panel (4) as shown in
diagram.
3b. Insert the Bolts (D) and
tighten it using the
Allen Key (C).
3c. Note that Lowest
position of the Mattress
Support Panel will be
for Toddler (babies who
can stand up and walk)
, Mid position is for
Infant babies who start
to turn and sit up) and
Highest Position is for
the New born.
3d. Ensure that the
Mattress Support Panel
is flat side up and not
slant.
(6)
X 1
C
x 4 (3/4”)
D