Evolution Aqua nexus 310 - Page 6

The difference is clear at www.evolutionaqua.com
5
IMPORTANT PREPARATION
A solid and level base is required. It should be a minimum of 1.2m x 1.0m, to allow easy access
to valves and for maintenance purposes. The Nexus lter needs to be well supported, this is to
prevent possible distortion when it is full of water. The best option for this would be a level 100
mm thick concrete plinth, although decking or paving slabs would be sufcient as long as the
Nexus sits level and is not allowed to deect under the weight of the water.
IMPORTANT NOTE: It is not sufcient to support the Nexus using just blocks underneath the feet,
as this could lead to damage to the Nexus.
Incorrect installation will render the warranty invalid.
Check all the jubilee clips on the 3 are tight to prevent leaks.
NEXUS 310 PUMP FED INSTALLATION
specication nexus eazy 310
Max Flow Rate
13,000 litres/hr
2,859 UK gallons/hr
3,431 US gallons/hr
K1 Media 100 ltrs bio/40 ltrs Eazy
Max Capacity 300 ltrs bio/40 ltrs Eazy
Max Pondsize
34,000 litres
7,500 UK gallons
9,000 US gallons
Rec. Airpump Airpump 95+
Volume of water in
lter
185 UK gallons
840 litres
222 US gallons
Table 1
Total Biological Media litres
50-75
75-100
100-150
150-300
Recommended
Airpump
Airpump 75
Airpump 95
Airpump 130
Airpump 150
Water
4” Pipe
1½” or 2” Pipe
UV