Evolution Aqua Cetus sieve - User Manual

INSTALLATION AND OPERATING MANUAL
WARNING:
Ensure that any electrical devices connected to the
Cetus Sieve are switched off at the mains before you
attempt to conduct any type of maintenance
Evolution Aqua Ltd. - Evolution House - Kellet Close - Wigan - Lancashire - United Kingdom - WN5 0LP
t +44 (0) 1942 216554 - f +44 (0) 1942 418489 - e info@evolutionaqua.com - w www.evolutionaqua.com
UK
English
CS001101191MAN

Summary

Overview of Cetus Sieve

Cetus Sieve Specifications

Cetus Sieve Dimensions

Cetus Sieve Components

Initial Cetus Sieve Set-up

Fit Waste Connection

Connect the 3" 90° eazy connector to the waste outlet and tighten the jubilee clip.

Install Screen

Place the 300 micron screen inside the Cetus Sieve, handling sharp edges carefully.

General Cetus Sieve Installation Advice

Pipe Sizes for Installation

Guidance on selecting correct pipe diameter based on flow rate and gravity/pump fed systems.

Circulating Pump Installation

Advice on pump placement and one-way valves for gravity-fed systems to prevent issues.

Pump Fed Cetus Sieve Installation

Cetus Sieve Nexus System Installation Advice

Gravity Fed Cetus Sieve Installation

Dual Gravity Fed Cetus Sieve Installation

Cetus Sieve Warranty Information

Evolution Aqua Cetus sieve Specifications

General

Brand	Evolution Aqua
Model	Cetus sieve
Category	Water Filtration Systems
Language	English