Evolution Aqua Cetus sieve - Overview of Cetus Sieve

3
OVERVIEW
The Cetus Sieve is a self-adjusting sieve which can be installed either gravity fed or
pump fed. The Cetus Sieve enables your pond water to be filtered of large amounts
of waste and debris before the water enters your current filter system. This process
is commonly referred to as “pre-filtering”. (See figure 2)
The Cetus Sieve can also be used as a stand-alone unit to remove leaves and other
floating debris from your pond via a surface skimmer.
The Cetus Sieve will efficiently and effectively remove large amounts of mechanical
waste from your pond.
The Cetus Sieve is compatible with all filtration systems, however it is the perfect
pre-filter for the Evolution Aqua Nexus filter range.
For gravity fed systems the Cetus Sieve has a weir which will automatically adjust to
the flow rate of your pump. (Max flow rate 18,000 litres/hr)
When the Cetus Sieve is used in front of any other biological/mechanical filter the
period in between cleaning will be extended. The biological process is improved by
the removal of organic matter which would consume oxygen and leach ammonia
and other compounds into the water.
Figure 2.