Evolution EVO42 User Manual

EVO42
5
www.evolutionsteel.com
SAFETY LABELS & SYMBOLS
WARNING: Do not operate machine if
warning and/or instruction labels are missing
ordamaged.ContactEvolutionPowerToolsfor
replacement labels.
Note: All or some of the following symbols may
appear in the manual or on the product.
SYMBOL MEANING
Eye protection should be worn
at all times when using this tool.
Hard Hat -
Head protection should be worn
at all times whilst using this tool,
to protect from overhead hazards
Ear protection / Ear defenders
should be worn at all times
whilst using this tool, this tool
exceed 85dB(A)
Electrical enclosure -
risk of electric shock.
Readandunderstandthe
instruction manual - before
operating this tool.
Caution!/Attention!
Instruction Manual
WEEE - Waste Electrical and
Electronic Equipment This
machine should be disposed of
as Electrical & Electronic Waste.
Fuse
INTENDED USE
• Thispowertoolisintendedtobeusedfor
drilling holes with annular cutters and twist
drills, in an industrial environment.
• Themachineisdesignedtobeheldonto
a magnetisable surface using its electro-
magnetic base.
• Thispowertoolshouldbeusedinaweather
protected environment, and be used with
the accessories provided, or Evolution Power
Tools recommended accessories only.
• Thepowertoolcanbeusedvertically,
horizontally and inverted, provided the
magnetic adhesion and work environment
allow.
WARNING: To prevent ingress of fluids
into the electrical system, cutting paste
should be used rather than cutting fluid when
using the machine in the inverted position.
PROHIBITED USES
• Thispowertoolshouldneverbeusedwithout
a ground or protective earth connection.
• Thispowertoolshouldnotbeusedina
potentially explosive environment.
• Thispowertoolshouldnotbeuseinawet
or humid environment where water could
be drawn into the power tools cooling and
ventilation system.
• Ifthepowertoolisusedintheinvertedor
horizontal position, cutting fluids should not
be used to prevent ingress of fluids into the
electricalsystem.Cuttingpasteshouldbe
used instead.
• Thispowertoolshouldneverbepositioned
on a work piece between the electrode and
ground of an arc type welder. Damage to the
machine will result as the welder will ground
through the power tools ground or earth cable.
• Thispowertoolshouldnotbeusedwhere
the voltage is abnormally lower than the
rated voltage, subject to voltage tolerances.
Checkthepowertoolratingplate,checkthe
voltage available.

Evolution EVO42 Specifications

General

Brand	Evolution
Model	EVO42
Category	Drill
Language	English