EasyManua.ls Logo

Evolution R185SMS-Li User Manual

Evolution R185SMS-Li
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Original written in UK English Date Published: 02/07/2021
SMS
Original Instructions
Originalbetriebsanleitung
Notice Originale
Instrucciones Originales
Instructions Originales
Oryginalna Instrukcja

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Evolution R185SMS-Li and is the answer not in the manual?

Evolution R185SMS-Li Specifications

General IconGeneral
Blade Diameter185 mm
Max Cut Depth (0°)65 mm
Max Cut Depth (45°)48 mm
Battery TypeLi-ion
Bore20 mm
Battery Voltage18 V
Battery Capacity4 Ah
TypeCordless Circular Saw

Summary

Machine Specifications

Cutting Capacities

Details the maximum material dimensions that can be cut.

Safety and Usage Guidelines

Intended and Prohibited Use

Defines the correct and incorrect applications for the power tool.

General Power Tool Safety

Work Area and Electrical Safety

Guidelines for maintaining a safe work environment and electrical precautions.

Personal Safety Guidelines

Recommendations for operator safety, including PPE and safe practices.

Operational and Specific Safety

Mitre Saw Specific Safety

Safety instructions tailored specifically for the operation of mitre saws.

Blade and Operation Safety

Blade Safety Precautions

Critical safety information regarding the handling and use of saw blades.

Personal Protective Equipment (PPE)

Essential protective gear recommendations for safe operation.

Assembly and Preparation

Head and Blade Installation

Unlatching and Raising the Cutting Head

How to release and raise the cutting head from its locked position.

Installing or Removing a Blade

Safety and procedure for changing the saw blade.

Blade Installation Procedure

Securing the Arbor and Blade

Detailed steps for correctly installing the saw blade and tightening its components.

Precision Angle Adjustments

Bevel Stop Adjustment

How to adjust and set the bevel stops for accurate cuts.

Angle and Depth Adjustments

Clamping and Operating Safety

Body and Hand Positioning

Critical safety advice on hand placement during operation.

Operating the Motor and Making Cuts

Preparing to Make a Cut

Pre-cut checks and safety advice, including avoiding over-reaching.

Safety Checks

Assembly Safety Checks

Essential checks to perform after assembling the machine.

Final Safety Checks

Final checks before operating the machine to ensure safety.

Related product manuals