Need help?Do you have a question about the Evolution R255SMS and is the answer not in the manual?
General| Blade Diameter | 255 mm |
|---|---|
| Power | 1600 W |
| Bevel Capacity | 45° |
| Maximum Cutting Depth | 80 mm |
| Type | Sliding Mitre Saw |
| Bore Size | 25.4 mm |
| Max Cutting Depth at 90° | 80 mm |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Max Cutting Capacity (0° x 0°) | 300 mm x 80 mm |
| Max Cutting Capacity (45° x 0°) | 210 mm x 80 mm |
| Mitre Capacity | 50° - 50° |
Guidelines for safe use of electrical components and power supply.
Essential safety practices applicable to all power tools.
Critical warnings regarding the dangers of rotating saw blades.
Recommendations for essential safety gear for operator protection.
Guidelines for executing cuts correctly and securely.
Instructions for adjusting and aligning bevel angle stops and pointers.
Detailed steps for setting the 0° bevel stop and pointer.
Detailed steps for safe blade replacement.
Critical safety rules for operating the laser guide.
Safe placement of hands and body during operation.
Verification of correct assembly before initial use.
Pre-operation checks to ensure safe functionality.
To Next Page