Need help?Do you have a question about the Evolution R210 MTS G2 and is the answer not in the manual?
General| Blade Diameter | 210 mm |
|---|---|
| Max Cutting Depth at 90° | 70 mm |
| Max Cutting Depth at 45° | 50 mm |
| Voltage | 230 V |
| Frequency | 50 Hz |
Details on completing product registration and validating the guarantee period online.
Provides web and email addresses for customer support and inquiries.
Details on motor, speed, and weight of the machine.
Maximum thickness for mild steel and cutting capacities for aluminium, wood, and PVC.
Information on blade diameter, bore, teeth, kerf, and noise/vibration levels.
Advises to check for and maintain warning/instruction labels for safe operation.
Explains various symbols used on the machine and in the manual for safety and identification.
Defines the correct applications and restrictions for operating the power tool.
Covers safety precautions for electrical connections and outdoor operation.
Provides comprehensive safety instructions for operating the power tool safely.
Details safe handling, blade checks, and workpiece support.
Advises on health risks associated with dust, especially lead, and recommended protection.
Specific safety guidelines for mitre saw operation based on EN standards.
Covers safety precautions for saw blades and recommended personal protective equipment.
Instructions for safe operation, including blade speed compatibility and workpiece handling.
Guidance on securing workpieces and stable machine positioning for safe cuts.
Advice on safely lifting and transporting the table mitre saw to prevent injury.
Instructions for unpacking the machine and verifying all supplied accessories.
Lists optional accessories available for purchase from the manufacturer.
Identifies and labels key components of the machine in mitre saw mode.
Identifies and labels key components of the machine in table saw mode.
Instructions for securely mounting the saw and fitting the rear stabilizing bar.
Steps for fitting the table saw guard assembly for safe operation.
Procedure for safely installing and removing saw blades, including safety warnings.
Detailed steps for blade removal and information on the Riving Knife's function and adjustment.
Instructions on how to set up the machine for operation as a mitre saw.
Guidance on fitting and using workpiece supports and the hold-down clamp.
Steps for releasing the cutting head and proper body/hand positioning for safe cuts.
Instructions on how to use the on/off trigger switch for the machine's motor.
Details on performing chop cuts and selecting mitre angles for cuts.
Guide on how to set and perform bevel cuts on the machine.
Instructions for setting bevel angles and performing compound cuts.
Procedures for clearing jammed material and configuring the machine for table saw use.
Steps to assemble and align the fence for use as a rip fence.
Instructions for basic table saw operations, including switches and rip cutting.
Guidance on the proper use and storage of the push stick for safe rip cutting.
How to check and adjust the 0° bevel angle for perpendicularity.
How to check and adjust the 45° bevel angle for accurate cuts.
Procedures for adjusting bevel stops and repositioning the fence for accuracy.
Guidelines for cleaning the machine, including oiling rotary parts and avoiding solvents.
Advice on proper disposal of waste electrical products for environmental protection.
Official declaration stating the product's compliance with relevant EU directives and standards.
Provides contact addresses and phone numbers for different regions like AUS, FR, UK, and USA.
Lists phone numbers for customer support in various European and other countries.
To Next Page