Need help?Do you have a question about the Evolution RAGE5-S and is the answer not in the manual?
General| Motor Power | 1500 W |
|---|---|
| Bevel Capacity | 45 degrees |
| Bore | 25.4 mm |
| Mild Steel Capacity (Wall Thickness) | 6 mm |
| Voltage | 230 V |
| Frequency | 50 Hz |
Guidelines for safe electrical operation and connection.
Ensuring a safe and well-lit working environment.
Precautions related to electrical connections and usage.
Guidelines for operator safety, including PPE and situational awareness.
Importance of wearing safety goggles or glasses.
Guidelines for using safe blades and the mandatory blade guard.
Safety rules for cutting, including freehand and kickback prevention.
Operation of the ON/OFF switch, blade height, and tilt adjustments.
Positioning the mitre gauge and workpiece for straight cuts.
How to set the mitre gauge for angled crosscuts.
Performing crosscuts with the blade tilted at an angle.
Performing cuts with both mitre and bevel angles set.
Using the rip fence and mitre gauge for cutting multiple pieces to length.
Instructions for cutting along the length of material using the rip fence.
Step-by-step instructions for safely replacing the saw blade.
To Next Page