Need help?Do you have a question about the Evolution RAGE3-S and is the answer not in the manual?
Guidelines for maintaining a clean, well-lit work area to prevent accidents.
Precautions for safe use of power tools regarding electrical hazards.
Instructions for operator protection, including PPE and attentiveness.
Guidelines for safe operation, maintenance, and storage of power tools.
Recommendations for servicing power tools by qualified personnel.
Information regarding potential health risks from materials like lead-based paint and wood dust.
Ensuring correct blade selection, secure transport, and pre-use checks for safe operation.
Techniques for securing workpieces and stable mounting for accurate cuts.
Important safety considerations, including eye protection and handling missing parts.
Guidelines for safe hand placement and body posture during operation.
Instructions for checking and adjusting angle settings using a set square.
Procedure to ensure the cutting head is precisely at a 0° bevel angle.
Steps to align the bevel pointer with the 0° mark on the protractor scale.
Procedure to set and verify the 45° bevel stop for accurate cuts.
Instructions for setting up the machine for 33.9° crown moulding cuts.
Steps to ensure the fence is square to the blade for precise cuts.
Performing simultaneous mitre and bevel cuts for complex angles.
Proper methods for cutting warped workpieces to ensure safety and accuracy.
Detailed steps for safely changing the saw blade, including tool usage.
Explanation of the dual-sided flange for fitting 25.4mm or 16mm arbor blades.
Instructions for fitting standard 25.4mm arbor blades using the inner-flange.
Instructions for fitting 16mm arbor blades by reversing the inner-flange.
Information on available accessories and where to purchase them.
How to fit and use the dust bag for wood cutting applications.
Instructions for fitting support bars for long or irregular workpieces.
Using the repeat stop for accurate repetitive cutting operations.
A checklist of essential conditions to verify before operating the machine.
Ensuring all safety features, guards, and components are correctly installed and functional.
Guidance on cleaning, care, and general upkeep of the mitre saw.
Information on the proper disposal of electrical equipment and its environmental impact.
Statement of compliance with relevant EU directives and safety requirements.
List of applicable standards and documentation supporting product compliance.
To Next Page
General