To Next PageTo Next Page
Need help?Do you have a question about the Evolution RAGE3+ and is the answer not in the manual?
General| Bevel Capacity | 45° |
|---|---|
| Weight | 5.9 kg |
| Bore | 25.4mm |
| Max. Box Section (Wall Thickness) | 3mm |
| Bevel Range | 0° - 45° |
Details on components like mitre locking handle, positive stop lever, and blade that need to be attached.
Instructions on how to insert and secure the mitre locking handle to the rotary table.
Guidance on installing the positive stop locking lever into its mechanism.
Steps to set the bevel neck to a vertical position before inserting carriage slides.
Detailed instructions on how to correctly insert the colour-coded carriage slide arms into the bevel neck.
Procedure for aligning and securely attaching the cutting head onto the carriage slide arms.
Proper method for routing the power cable to ensure safety and prevent damage.
Steps to unlatch and safely raise the cutting head to its upper position.
Comprehensive guide on safely installing the saw blade, including warnings and recommendations.
Instructions on deploying the rear support arm for added stability during use.
