Evolution RAGE3+ - Assembly Safety Checks

Part Condition Yes
Slides 
connected to the cutting head.
Locating lugs successfully deployed.
Slide Carriage
Locking Screw

Anti-vibration spring tted beneath the Locking
Screw Hand Knob.
Positive stop
locking lever

Mitre locking
handle

Power cable Routed correctly and fastened to back slide bracket.
50-60mm max deection at the midpoint.

ANY ‘NO’ = DO NOT USE
IMPORTANT: Only use the dust bag* when cutting wood.
Remove when cutting metallic materials.
*Can be purchased as an accessory.
ASSEMBLY SAFETY CHECKS
16
www.evolutionpowertools.com