Need help?Do you have a question about the Evolution RAGE and is the answer not in the manual?
Read and understand all safety instructions. Contact helpline for any uncertainties.
Details the limited guarantee, registration, and exclusions for the power tool.
Explains vibration exposure risks, potential health effects, and mitigation strategies.
Describes the meaning of various safety and operational symbols used in the manual.
Specifies the proper applications and materials for the circular saw.
Outlines uses that are forbidden, including modifications or using incorrect accessories.
Details warnings regarding use by persons with reduced capabilities or lack of experience.
Details motor specifications, voltage, frequency, speed, and weight.
Specifies maximum cutting thickness for mild steel and cutting dimensions at 90° and 45°.
Lists blade diameter, bore, tooth count, kerf, and speed specifications.
Provides sound pressure, sound power, and vibration level measurements.
Covers safe use of power cords, plugs, RCDs, and avoiding wet conditions.
Guidelines for using the tool outdoors, emphasizing protection from rain and dampness.
Covers work area safety, keeping clean, avoiding explosive atmospheres, and general electrical precautions.
Emphasizes staying alert, using PPE, preventing unintentional starts, and proper dress.
Instructions on forcing the tool, maintenance, sharp blades, and correct usage.
Ensures tool safety is maintained by qualified repair and using identical parts.
Warns about dust hazards, lead paint, and recommends protective equipment.
Stresses the importance of wearing safety goggles or face shields to prevent eye injury.
Explains kickback causes and provides detailed advice on how to avoid it.
Instructions for safely unpacking the machine and verifying all supplied accessories.
Lists the standard accessories included with the power tool.
Information on optional accessories available for purchase.
Identifies key components of the circular saw with numbered labels.
Steps for preparing the machine and safely installing or removing the saw blade.
Instructions on fitting and adjusting the parallel edge guide for rip cutting.
Procedure for setting the desired cutting depth using the lever lock.
Steps to adjust the cutting angle (bevel) using locking screws and angle scale.
Routine checks, workpiece clamping, and general advice for safe operation.
How to safely start the circular saw using the trigger switch and safety lock button.
Instructions for fitting, emptying, and maintaining the chip collector for dust management.
Guide for fitting the discharge port exhaust for wood chip ejection.
Tips for efficient cutting, including PPE, cable awareness, and applying smooth pressure.
Advice on cleaning, checking safety features, and lubrication requirements.
Procedure for inspecting and replacing worn motor brushes.
Guidance on responsible disposal and recycling of electrical waste products.
Specifies the product description, model number, voltage, and frequency.
To Next Page
General