Evolution RAGE5-S User Manual

6
www.evolutionpowertools.com
(1.9)
Symbol Description
V
Volts
A
Amperes
Hz
Hertz
min
-1
Speed
~
Alternating Current
n
o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Do Not Touch
Wear Dust Protection
Wear Safety Gloves
Read Instructions
CE Certification
EAC Certification
Triman - Waste Collection
& Recycling
Waste Electrical &
Electronic Equipment
Warning
Protection Class II
Double Insulated
(1.10)
INTENDED USE OF
THIS POWER TOOL
WARNING: This product is a table saw and
has been designed to be used with special
Evolution blades. Only use accessories
designed for use in this machine and/or
those recommended specically by
Evolution Power Tools Ltd.
When tted with an appropriate blade
this machine can be used to cut:
Mild Steel (Max Thickness 6mm)
Aluminium (Max Thickness 6mm)
Wood and wood based materials
(Max Thickness 80mm)
(1.11)
PROHIBITED USE OF THIS POWER TOOL
WARNING: This product is a table saw
and must only be used as such. It must not
be modified in any way, or used to power
any other equipment or drive any other
accessories other than those mentioned in this
instruction manual.
(1.13)
WARNING: This machine is not intended
for use by persons (including children) with
reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning the safe use of the machine by
a person responsible for their safety and who
is competent in its safe use.
Children should be supervised to ensure
that they do not have access to, and are
not allowed to play with, this machine.

Evolution RAGE5-S Specifications

General

Motor Power	1500 W
Bevel Capacity	45 degrees
Bore	25.4 mm
Mild Steel Capacity (Wall Thickness)	6 mm
Voltage	230 V
Frequency	50 Hz