Need help?Do you have a question about the Evolution R210CMS and is the answer not in the manual?
General| Blade Diameter | 210 mm |
|---|---|
| Bore Size | 25.4 mm |
| Max. Cut Depth at 90° | 70 mm |
| Motor Power | 1200 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
General safety instructions for using electric tools to reduce risks.
Guidelines for maintaining a safe and clean work environment.
Precautions related to power tool plugs, cords, and grounding.
Ensure workpiece stability, clean area, and proper clamping technique.
Proper pushing, avoiding cross-handing, and supporting workpieces.
Use correct blades, plan angles, and handle jammed material safely.
Carefully unpack the machine and accessories, check for completeness and condition.
Location of serial number and how to identify batch code.
List of accessories included with the mitre saw.
List of optional accessories available for purchase.
Instructions for securely fixing the mitre saw to a workbench.
Guidance on mounting the saw on a plywood board for portability.
Guidance on safe hand placement and body posture during operation.
Instructions for adjusting the 0° and 45° bevel stops on the cutting head.
Procedure to adjust the 45° bevel stop for accurate angle setting.
How to fit and use the dust bag for cutting wooden materials.
Procedure for safely removing the table insert from the machine.
Instructions for fitting a new table insert and re-aligning the fence.
To Next Page