Need help?Do you have a question about the Evolution R255 TBL and is the answer not in the manual?
Covers work area, electrical, and personal safety.
Guidelines for safe operation and maintenance.
Warnings related to blade guards, riving knives, and cutting methods.
Information on kickback causes and preventative measures.
Guidelines for safe operation and handling of the table saw.
Specific safety instructions for table saws, including dust masks and abrasive wheels.
Covers residual risks, cleaning procedures, and noise warnings.
Instructions for assembling the table saw stand.
Steps for fitting the blade and riving knife.
Guidance on using and aligning the rack and pinion fence.
How to adjust cutting height and use the push stick.
Performing 90°, bevel, and mitre cuts.
Using table extensions, clamps, dust extraction, and moving the saw.
Steps for changing the saw blade.
Adjusting the blade guard for safety.
Procedures for setting up the riving knife and blade guard.
Guidance on using the blade guard and push stick.
How to install, align, and adjust the rip fence.
Using the fence for different cutting positions.
Step-by-step guide for making 90-degree cuts.
Information on blade types and using the power switch.
Instructions for setting up and performing mitre cuts.
Instructions for setting up and performing bevel cuts.
Using the sliding table for cuts.
Fine-tuning bevel angles for precise cuts.
How to adjust the saw blade's cutting height.
Instructions for using the mitre gauge for angled cuts.
Steps for connecting dust collection hoses and adaptors.
How to fold and move the table saw for transport.
Procedures for checking blade alignment with the fence.
Checking alignment at 90° and other angles.
Verifying blade height and kerf plate settings.
Procedures for checking and adjusting the 45° bevel angle.
To Next Page
General