To Next PageTo Next Page
Need help?Do you have a question about the Evolution R255SMS-DB and is the answer not in the manual?
General| Blade Diameter | 255 mm |
|---|---|
| Max Cutting Depth at 90° | 80 mm |
| Max Cutting Depth at 45° | 55 mm |
| Motor Power | 2000 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
Please read these operating and safety instructions carefully and completely.
Details on product registration and warranty validation.
Specs for cutting different materials.
Details on blade size and teeth.
Laser class and output power.
Sound pressure and power levels.
Specs for cutting different materials in imperial units.
Blade size and teeth for NA models.
Laser class and output power.
Sound pressure and power levels.
Identifies safety symbols and their meanings.
Covers replacement parts and polarized plugs for safety.
Describes the tool's intended applications and limitations.
Lists actions and uses that are forbidden for the tool.
Warning for persons with reduced physical or mental capabilities.
Precautions for safe use of electricity.
Warnings and precautions for using the tool outdoors.
Safety guidelines for the work environment.
Electrical safety precautions for power tools.
Guidelines for operator's personal safety.
Best practices for using and maintaining power tools.
Guidelines for servicing and repair of power tools.
Safety rules specific to mitre saws.
Crucial safety information regarding saw blades.
Warnings about lead paint dust exposure risks.
Recommends masks for dust from MDF and wood products.
Recommends safety gear like ear protection, eye protection, and masks.
General guidelines for safe operation and setup.
Instructions for performing cuts safely and accurately.
Admonishes against operating with missing parts.
Tips for safely lifting and transporting the mitre saw.
Additional safety warnings specific to US/Canadian standards.
Instructions for unpacking the machine and checking contents.
Location and identification of serial and batch codes.
Lists optional accessories available for purchase.
Details the components included in the machine's packaging.
Identifies and labels parts 1-28 of the machine.
Lists and describes parts 29-46 from the overview diagram.
Instructions for assembling and preparing the machine.
Lists tools required for assembly and adjustments.
Identifies the main parts that need assembly.
Explains the function and fitting of the mitre locking knob.
How to adjust the bevel neck to the 0° position.
Steps to correctly insert the carriage slide.
Instructions for attaching the cutting head to the carriage.
How to fit the table extension pieces.
Guidance on safely routing the power cable.
Step-by-step guide for blade installation and removal.
How to check and adjust the machine's precision angles.
Procedure to set the bevel stop at 0 degrees.
How to align the bevel pointer with the 0° mark.
How to set the bevel stop for 45° left cuts.
How to set the bevel stop for 45° right cuts.
How to align the fence to be square with the blade.
How to adjust the mitre angle pointer.
How to set the depth stop for cutting slots.
How to adjust the sliding upper fence sections.
Information on using the laser cutting guide.
Critical safety warnings and precautions for laser use.
Steps to adjust the laser alignment for accuracy.
Instructions for securely fixing the saw to a workbench or stand.
Guidelines for setting up the saw for portable use.
Instructions for using standard and quick-release hold down clamps.
Instructions for using the front clamp, including quick release.
Guidance on correct body and hand placement during operation.
Operation of the power switch.
Steps to prepare for making cuts safely.
How to perform basic chop cuts.
How to perform cuts using the sliding carriage.
How to perform cuts at various mitre angles.
How to perform cuts at various bevel angles.
How to perform combined mitre and bevel cuts.
How to set up and cut crown mouldings.
Precautions for cutting bowed or warped material.
Steps to safely clear jammed material from the saw.
Lists optional accessories like dust bags and tubes.
How to clean the blade guards and check their operation.
General maintenance guidelines for the machine.
How to adjust the tension of the drive belt.
Instructions for replacing the drive belt.
Advice on responsible disposal of electrical waste.
Checklist for ensuring correct assembly before use.
Checklist for final safety inspections before operation.
Manufacturer's declaration of compliance with EU directives.
