Evolution R210 MTS G2 User Manual

20
www.evolutionpowertools.com
EC DECLARATION OF CONFORMITY
The manufacturer of the product covered by this Declaration is:
UK: Evolution Power Tools Ltd. Venture One, Longacre Close, Holbrook Industrial Estate, Sheeld, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
The manufacturer hereby declares that the machine as detailed in this declaration fulls all the relevant
provisions of the Machinery Directive and other appropriate directives as detailed below.
The manufacture further declares that the machine as detailed in this declaration, where applicable,
fulls the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC. Machinery Directive.
2014/30/EU. Electromagnetic Compatibility Directive
The Restriction of the Use of certain Hazardous
Substances in Electrical Equipment (RoHS) Directive
2012/19/EU. The Waste Electrical and Electronic Equipment (WEEE) Directive.
And is in conformity with the applicable requirements of the following documents:
EN 61029-1:2009+A11• EN 61029-2-11:2012+A11• EN 55014-1:2017+A11:2020 •
EN IEC 55014-1:2021 • EN IEC 55014-2:2021 • EN IEC 61000-3-2:2019+A1 •
EN IEC 61000-3-11:2019
EC type approval to 2006/42/EC Article 12 Section 3b Machinery
Notied Body: TÜV Rheinland LGA Products GmbH - Tillystraße 2 - 90431 Nürnberg
Notied Body No.: 0197 Reg. No.: BM 50592380 0001
Product Details
Description: R210MTS G2 210mm MULTI-MATERIAL TABLE/MITRE SAW
Evolution Model No: 1160001, 1160002, 1160003, 1160004
Brand Name: EVOLUTION
Voltage: 220-240V~ 50Hz
Input: 1500W
The technical documentation required to demonstrate that the product meets the requirements
of directive has been compiled and is available for inspection by the relevant enforcement
authorities, and veries that our technical le contains the documents listed above and that they
are the correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed: Print: Barry Bloomer
Supply Chain & Procurement Director
Date: 08/02/22
UK: Evolution Power Tools Ltd. Venture One, Longacre Close, Holbrook Industrial Estate, Sheeld, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
2011/65/EU. &
2015/863/EU.

Evolution R210 MTS G2 Specifications

General

Brand	Evolution
Model	R210 MTS G2
Category	Saw
Language	English