4
www.evolutionpowertools.com
The declared noise emission values have been
measured in accordance with a standard test
method (EN 61029-1, EN 61029-2-11) and may
be used for comparing one tool with another.
WARNING: The noise emission during actual
use of the power tool can differ from the
declared total value depending on the ways in
which the tool is used, in particular, what kind
of work piece is machined.
It is necessary to identify safety measured
to protect the operator that are based on
an estimation of exposure in the actual
conditions of use (taking account of all parts
of the operating cycle such as the times when
the tool is switched off and when it is running
idle in addition to the trigger time)
LABELS & SYMBOLS
WARNING: Do not operate this machine
if warning and/or instruction labels are
missing or damaged. Contact Evolution
Power Tools for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
Symbol Description
V
Volts
A
Amperes
Hz
Hertz
Min
-1
Speed
~
Alternating Current
n
o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Do Not Touch
Wear Dust Protection
Read Instructions
CE certification
UKCA Certification
Warning
Waste electrical and
electronic equipment
Double Insulated
Triman - Waste Collection
& Recycling
To Next Page
Loading...
Need help?
General