Evolution X-Session Advanced User Guide
8
Each of the X-Session’s 28 controllers can send MIDI CC, RPN/NRPN, GM 1&2 SysEx
and even be assigned to individual MIDI channels.
MIDI CC (continuous controller) numbers are part of the standard MIDI specifications and
are typically used to control the real-time changing of parameters in musical equipment.
For a complete list of standard MIDI controller numbers from 0 to 131, please see
Appendix E on page 29.
Any of the 28 real-time controllers on the X-Session can be assigned to a MIDI CC
number however the 10 assignable buttons have slightly different options from the cross
fader or 16 rotary controllers.
The following 2 charts show all the transmit messages you can program for each
of the 18 fader/controllers and 10 assignable MIDI buttons respectively. We show you this
already at this stage, so you can follow the principle of programming the X-Session
controllers in the following instructions and examples.
Please pay extra attention to the differences between how you program the cross fader or
controllers and how you program the buttons.
Introduction To X-Session Programming Options
ASSIGN Description Data Lsb
(Press Twice)
Data Msb
(Press Twice)
0-119 Standard MIDI CC’s - -
120-127 Channel Mode Messages - -
128 Pitch Bend Sensitivity - -
129 Channel Fine Tune - -
130 Channel Coarse Tune - -
131 Channel Pressure - -
132 RPN coarse RPN LSB RPN MSB
133 RPN fine RPN LSB RPN MSB
134 NRPN coarse NRPN LSB NRPN MSB
135 NRPN fine NRPN LSB NRPN MSB
136 Master Volume GM* - -
137 Master Pan* - -
138 Master Coarse Tune* - -
139 Master Fine Tune* - -
140 Chorus Mod rate** - -
141 Chorus Mod Depth** - -
142 Feedback** - -
143 Send to Reverb** - -
144 Pitch Bend - -
255 Controller Off**** - -
Cross Fader & Rotary Dials
* General MIDI SysEx messages - for details please see pages 8 & 18.
** General MIDI 2 SysEx messages
*** MMC Sysex messages, for details please see page 11.
**** This value cannot be typed in using the numerical keypad. Use '+' or '-'.
25
Evolution X-Session Advanced User Guide
Appendix B - Assignable MIDI CC’s
on the X-Session
B1 - The Cross Fader and rotary Controllers:
MIDI CC Description Data Lsb (Press
Twice)
Data Msb (Press
Twice)
0-119 Standard MIDI CC’s - -
120-127 Channel Mode Messages - -
128
Pitch Bend Sensitivity - -
129
Channel Fine Tune - -
130
Channel Coarse Tune - -
131
Channel Pressure - -
132
RPN coarse RPN LSB RPN MSB
133
RPN fine RPN LSB RPN MSB
134
NRPN coarse NRPN LSB NRPN MSB
135
NRPN fine NRPN LSB NRPN MSB
136
Master Volume GM* - -
137
Master Pan GM* - -
138
Master Coarse Tune GM* - -
139
Master Fine Tune GM* - -
140
Chorus Mod rate GM2* - -
141
Chorus Mod Depth GM2* - -
142
Feedback GM2* - -
143
Send to Reverb GM2* - -
144
Pitch Bend - -
255
Controller Off***
- -
* Sysex messages - for details please see pages 8 & 18.
** MMC Sysex messages, for details please see page 11.
*** This value cannot be typed in using the numerical keypad. Type in 144 and
then press the '+' button to set this value, or 0 and press the '-' button.
To Next Page
Loading...