Evolveo EasyPhone XG - Charging the battery; Turning ON;OFF the telephone; Unlocking;locking the keypad; Calling

13
Charging the battery
Connect the charger to the USB connector
or put the telephone into the charging stand.
Charging starts automatically. The telephone can
be charged both in the ON and OFF status. The
battery charge status is indicated on the telephone
screen.
Turning ON/OFF the telephone
To turn ON, press and keep the red button (13)
pressed until the telephone is ON. (You can be
asked to enter the PIN code if the PIN code
protection is ON.) On turning ON for the first time,
you will be asked to select the telephone language.
To turn OFF, press and keep the red button (13)
until the telephone begins to turn OFF.
Unlocking/locking the keypad
To unlock/lock, switch the keypad lock button (17).
Calling
In stand-by mode, enter the telephone number
and press the call button (6) to start a call.
Press the red button (13) to end or refuse the
call (4).