22
EVOFLAME MANUAL ISS. 3.1EVOFLAME MANUAL ISS. 3.1
EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1
RESETTING YOUR FIRE
If you have entered a wrong email or password during the set-up process,
then you may need to reset your fire to factory settings. To do this your
fire must be updated to the latest version, you can do this by following the
instructions on page 15.
Once your fire is fully updated you can reset it by turning it off and on at the
rocker switch 5 times. Be sure to allow 1 second between each click. There
will be an audible beep after this has been done, you can then continue with
the set up process on page 4.
To Next Page
