Need help?Do you have a question about the Evoqua WALLACE & TIERNAN DEPOLOX 5 Series and is the answer not in the manual?
General| Brand | Evoqua |
|---|---|
| Model | WALLACE & TIERNAN DEPOLOX 5 Series |
| Category | Measuring Instruments |
| Language | English |
Identifies personnel for whom the manual is intended.
Explains various notes and pictograms used in the manual.
Specifies the authorized applications and limitations of the DEPOLOX® 5 E flow cell.
Provides essential safety guidelines for working with the unit.
Outlines safety precautions for different operational stages.
Lists requirements for maintaining warranty validity.
Details limitations of manufacturer liability for damages.
Describes the available non-pressurized and pressurized versions of the flow cell.
Details the various sensor and component configurations for the flow cell.
Lists available spare parts and optional extensions for the flow cell.
Lists optional accessories that can enhance the flow cell's functionality.
Explains the overall design and functional principles of the flow cell.
Describes the optional sensors that can be equipped with the flow cell.
Provides detailed technical specifications and parameters for the flow cell.
Lists the components included in the delivery of the flow cell system.
Provides guidelines for safe handling and storage of the flow cell.
Specifies the environmental requirements for correct and safe operation.
Details the procedures and precautions for physically installing the flow cell.
Explains how to install the electronics module and flow cell.
Describes how to remove and attach the flow cell's housing cover.
Instructions for installing an optional strainer on the sample water inlet.
Guidance on connecting the sample water inlet, including pressure and material considerations.
Instructions for connecting the sample water outlet, considering pressure and material.
Illustrates various options for extracting sample water.
Steps for installing the fine filter, specifically for membrane sensors.
Procedure for removing the felt washer before initial startup.
Instructions for handling transport caps on the electrolyte tank.
Step-by-step guide on how to fill the electrode cleaning sand.
Details the process of connecting sensors to the DFMe electronics module.
Instructions for installing optional sensors into the flow cell.
Guidance on fitting calibration clips and positioning calibration solution.
Procedures for the initial startup of the system after installation.
Steps for safely taking the flow cell out of operation.
Steps to put the flow cell back into operation after shutdown.
Information on installing retrofit kits for upgrades.
Defines the recommended schedule for maintenance tasks.
Lists part numbers for annual and 4-year maintenance kits.
Daily procedure to check all screw connections for leaks.
Weekly check of the electrode cleaning sand level and condition.
Procedure to check and replenish the electrolyte solution level.
Inspection of diaphragms for discoloration indicating clogging.
Comprehensive procedure for replacing key maintenance components.
Steps for cleaning or replacing the fine filter for sensor protection.
Procedure for cleaning the flow rate monitor and check valve components.
General guidance on cleaning the unit using mild detergents.
Comprehensive list of spare parts for the non-pressurized flow cell.
Comprehensive list of spare parts for the pressurized flow cell.
Details the cell body components for different flow cell versions.
Lists parts for the DFMe electronics module and its components.
Lists parts related to the 3-electrode measuring cell.
Lists available lengths of CAN bus extension cables.
Details available sensors and related consumables like buffer solutions.
Lists various accessories for the DEPOLOX® 5 E flow cell.
Lists kits for retrofitting or extending the flow cell's capabilities.
To Next Page