Need help?Do you have a question about the Evoqua WALLACE & TIERNAN GMS PLUS and is the answer not in the manual?
General| Type | Gas Monitoring System |
|---|---|
| Display | LCD |
| Output Signal | 4-20 mA |
| Monitored Gases | Chlorine, Sulfur Dioxide, Ammonia, Ozone |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Operating Humidity | 0 to 95% RH (non-condensing) |
| Analog Output | 4-20 mA |
| Communication | Modbus RTU |
| Protection Rating | IP65 (NEMA 4X) |
| Operating Temperature | -20°C to +50°C |
Manual structure and target audience.
Explanation of symbols and notes used in the manual.
Defines the system's purpose and application limitations.
General and specific safety guidelines for operation and maintenance.
Warranty conditions and occupational exposure limits (AGW-Values).
Detailed technical data including accuracy, power, and outputs.
Scope of supply, system design, and available versions.
Specifications for Chloratect, mA, and Pt1000 sensors.
Technical details for the optional 24V battery supply unit.
Explains system applications, general features, and typical uses.
Details alarm settings, modes, door contact, and sensor alarms.
Describes RS232/RS485 interfaces for printers and bus connections.
Covers temperature measurement, mA outputs, power fail, and test functions.
Details the optional battery supply, its operation, and replacement.
Guidelines for safely handling and storing the unit.
Covers unit mounting, sensor installation, electrical setup, and battery installation.
Procedures for commissioning Chloratect and mA sensors.
Details for adjusting sensor span and performing function tests.
Outlines overall commissioning, mains voltage, shutdown, and battery replacement.
Identifies and explains the unit's display and operating elements.
Covers notes on operation, access codes, and menu navigation.
Lists error messages, their meanings, and troubleshooting steps.
Outlines regular maintenance activities and intervals.
Details electrolyte replenishment and replacement for sensors.
Instructions for replacing fuses and the unit's battery.
Lists part numbers for essential spare parts and consumables.
Lists available accessories for the GMS plus system.
Lists sensors and kits for Chloratect, mA, and Pt1000 types.
Provides detailed wiring diagrams for system connections.
To Next Page