Need help?Do you have a question about the Evoqua WALLACE & TIERNAN DEPOLOX 400 M and is the answer not in the manual?
General| Model | DEPOLOX 400 M |
|---|---|
| Category | Measuring Instruments |
| Protection class | IP65 |
| Manufacturer | Evoqua (WALLACE & TIERNAN) |
| Type | Analyzer |
| Measurement parameters | Free chlorine, pH |
| Response time | < 60 seconds |
| Operating temperature | 0 to 45 °C |
| Operating pressure | Max. 1 bar |
| Power supply | 100-240 VAC, 50/60 Hz |
| Output signal | 4-20 mA |
Specifies the analyzer's purpose for measuring water parameters and operational safety.
Highlights risk of uncontrolled dosing if sample water monitoring is disabled.
Details the design, functions, messages, safety features, digital inputs, relay outputs, and interfaces of the electronic module.
Details the 3-electrode cell, pH, fluoride, and membrane sensors (TC3, FC2, CD7, OZ7).
Provides technical specifications for the electronic module, DEPOLOX® 5 C, VariaSens C, and sensors.
Details integrated Ethernet interfaces, configuration, direct connection, and Windows settings.
Describes Modbus TCP protocol, data formats, and reference list.
Outlines the checklist for performing mechanical installation, including flow cell module, Y-style assembly, water connections, sensor installation, and electrical installation.
Provides warnings and guidelines for electrical installation.
Explains the process for safe and correct initial commissioning.
Provides instructions for safely shutting down the disinfection analyzer.
Explains access to operating and configuration levels via System menu, including Operation mode, Calibration, Inputs/Outputs, Alarms, Login, Settings, Information, User Administration, and Web Visualization.
Details the process of updating the device firmware using a USB stick.
Explains how to adjust measurements using calibration solutions or comparative measurements.
To Next Page