Do you have a question about the Evoqua DEPOLOX POOL COMPACT WALLACE & TIERNAN and is the answer not in the manual?
Brand | Evoqua Wallace & Tiernan |
---|---|
Category | Measuring Instruments |
Installation | Wall-mounted |
Display | LCD |
Protection Rating | IP65 |
Measuring parameters | Free chlorine, pH, ORP |
Outputs | 4-20 mA, Relays |
Power supply | 230 VAC, 50/60 Hz |
Operating Temperature | 0-50 °C |
Weight | Varies depending on the model |
Application | Swimming pool water treatment |
Measurement Range | Free Chlorine: 0-10 ppm, pH: 0-14, ORP: -1000 to +1000 mV |
System designed for measurement and control tasks in swimming pools and baths.
Manufacturer emphasizes safety; instructions in documentation and on the unit must be observed.
Lists technical specifications for the electronics module.
Specifies environmental requirements for correct and safe operation.
Details precautions and general steps for mechanical installation.
Guides installation of the electronics module and flow cell with or without DIN rail.
Instructions for installing and connecting various sensors and components.
Provides safety warnings and general guidelines for electrical installation.
Describes how to access and use the measurement menu for settings and calibration.
Explains access to operating and configuration levels via the System menu.
Explains how to access and perform calibration for measurements.
Explains how to configure alarms and assign relay functions.
How to access and use web views for measurements and settings.
Instructions for updating device firmware using a USB stick.
General information on calibrating measurements and safety precautions.
Explains how messages, alarms, and errors are displayed and acknowledged.
Provides a table of common faults and their remedies.
Outlines recommended maintenance intervals for various checks and replacements.
Safety warnings and steps for replacing fuses on the CPU board.
Shows the overall wiring diagram of the system, including power, interfaces, and digital inputs.