Need help?Do you have a question about the Evoqua WALLACE & TIERNAN MFC and is the answer not in the manual?
Details specifications for the MFC electronic module, housing, electronics, insulation, and operating conditions.
Details integrated control modes like Single Feed Forward, Single Feed Back, and Compound-Loop control.
Provides a step-by-step guide for initial setup, connecting modules, and selecting applications.
Details available sensor modules for pH, ORP, Conductivity, Fluoride, and membrane sensors.
Details parameters for Flow rate, Setpoint/DF, Analog outputs, Digital inputs, and Interface settings.
Details specifications for the MFC electronic module, housing, electronics, insulation, and operating conditions.
Details integrated control modes like Single Feed Forward, Single Feed Back, and Compound-Loop control.
Provides a step-by-step guide for initial setup, connecting modules, and selecting applications.
Details available sensor modules for pH, ORP, Conductivity, Fluoride, and membrane sensors.
Details parameters for Flow rate, Setpoint/DF, Analog outputs, Digital inputs, and Interface settings.
General| Model | MFC |
|---|---|
| Display | LCD |
| Manufacturer | Evoqua Water Technologies (WALLACE & TIERNAN) |
| Type | Controller |
| Application | Water and Wastewater Disinfection |
| Control Method | PID control |
| Input Signals | 4-20 mA |
| Output Signals | 4-20 mA, relay |
| Communication | Modbus |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Enclosure Rating | IP65 |
| Operating Temperature | -10°C to 50°C |
To Next Page
