EVS Synapse SFR04 - Page 4

INSTALLATION AND
CONFIGURATION MANUAL
SFR04/08/18
4
UL
Warning
 Troubleshooting must be performed by a trained technician. Do
not attempt to service this equipment unless you are qualified to
do so.
 Check that the correct fuses have been installed. To reduce the
risk of fire, replace only with fuses of the same type and rating.
 This equipment has more than one power supply. To reduce the
risk of electric shock, disconnect both power supply cords before
servicing.
 This apparatus must be earthed. Use only certified power cables.
 The front of the frame may only be opened by trained service
personnel.
 Installation and maintenance of the SFR04, SFR08 and SFR18 is
considered service action.
 The service area should be closed the proper way after service
actions to guarantee safe operation. The service areas are marked
with the label shown left.
 No user serviceable parts are inside. Refer all service to qualified
personnel.
 Warning, hazardous moving parts inside fan tray. Keep fingers
and other body parts away.
 The opened front lid may not be used as a shelf to store objects.
 Chapters containing service actions are marked with an
exclamation mark.
 This equipment is only for use at altitudes not more than 2000m
above sea level or equivalent.
 This equipment is only for use in non-tropical conditions or
equivalent.
Exposed portions of the power supply assembly are electrically “hot”. To reduce the risk of electrical
shock, the power cord must be disconnected when the power supply assembly is removed.
The ground terminal of the power plug is connected directly to
the chassis of the unit. For continued protection against electric
shock, a correctly wired and grounded (earthed) three-pin
power outlet must be used. Do not use a ground-lifting adapter
and never cut the ground pin on the three-prong plug.