Need help?Do you have a question about the EVS XT Series and is the answer not in the manual?
General| Operating System | Linux-based |
|---|---|
| Networking | 10 Gigabit Ethernet |
| Supported Codecs | AVC-Intra, DNxHD, ProRes, XAVC, MPEG-2 |
| Processor | Intel Xeon |
| Connectivity | USB, Ethernet |
| Power Supply | Redundant Power Supplies |
Configuration of video and audio channels within the EVS system.
Management of 3D and 1080p dual-stream features.
Management and control of Hypermotion cameras.
Menu for system maintenance operations.
Setting up the system's hardware configuration.
Management of software license codes and options.
Function to erase all media from the RAID disk array.
Adjusting the digital phase of the mainframe for SD and HD.
Defining the application that starts automatically on system entry.
Restoring factory default settings for all applications.
Checking hardware and rebuilding RAID arrays.
Monitoring the status of disks on the disk array.
Process for rebuilding SCSI RAID arrays.
Reading the system configuration file from disk.
Generating a new configuration file on disks.
Final step of microcode initialization for system readiness.
Recovering data from disks using EVS Disk Doctor.
Monitoring the status of the SDTI network.
To Next Page
![Preview: EVS XT[2]](https://data.easymanua.ls/products/617905/200x200/evs-xt-2.webp)
