To Next Page
C
Caleb JohnsonJul 30, 2025
Why the connection cannot be established on my EVS XS?
- SSusan CopelandJul 31, 2025
Ensure that all equipment is set to the same speed and connected to the non-relay connectors.
Why the connection cannot be established on my EVS XS?
Ensure that all equipment is set to the same speed and connected to the non-relay connectors.
How to establish connection on EVS XS Server?
Ensure that all equipment is set to the same speed and connected to the non-relay connectors to establish a connection on your EVS Server.
General| Video format | HD, SD |
|---|---|
| Networking | 10 GbE |
| Supported codecs | AVC-Intra, DNxHD, ProRes, XAVC, H.264 |
| Processor | Intel Xeon |
| Storage | SSD, HDD |
| Network | 10 GbE |
| Operating System | Linux |
| Form Factor | 2U rackmount |
Introduction to the EVS XS server range, its features, and capabilities.
Information on safety standards and design compliance for the equipment.
Details on Electromagnetic Compatibility (EMC) standards the equipment complies with.
Warning regarding potential radio frequency interference and user corrective measures.
Information on FCC compliance for Class B digital devices and affixed labels.
Explanation of CE marking indicating compliance with EU directives.
Detailed mechanical dimensions and weight specifications for XS server chassis.
Information on redundant power supply, grounding, electrical specifications, and consumption.
Operating and storage conditions for temperature, humidity, and ventilation.
Video standards, formats, digital interfaces, and channel counts for the XS server.
Details on audio configurations, channels, and processing for XS servers.
Supported video codecs, bitrate ranges, and encoding/file header configurations.
Information on XNet, Gigabit Ethernet, and XF transfer capabilities and speeds.
Explanation of video interpolation techniques for slow-motion playback.
Procedures for unpacking, ventilation, rack mounting, and initial board checking.
Detailed description of rear panel layouts and connector configurations for 6U and 4U servers.
Details on video connections, referring to the Configuration manual for supported configurations.
Information on digital and analog audio connectors, channels, and pinouts.
Details on RS422 connector pinout and redundant IPDP serial link for remote control.
Introduction to XNet2 network, architecture, and setup requirements.
Overview of Gigabit Ethernet connections for data transfer, including XTAccess and supported switches.
Details on GPI input and output connections, including opto-isolated and TTL configurations.
Overview of installed boards and slot configurations for 6U and 4U XS server racks.
Description of V3X boards, COD modules, XDCAM modules, and genlock functionality.
Details on the audio codec board, its LEDs, and audio connections.
Description of the H3X board, its modules, LEDs, and connectors.
Schema and connectors of the 10GbE board, including SFP+ modules compatibility.
Information on RSAS board, SAS disk arrays, and LEDs for internal and external arrays.
Introduction to the MTPC board, its function, hardware composition, and specifications.
![Preview: EVS XT[2]](https://data.easymanua.ls/products/617905/200x200/evs-xt-2.webp)
