Need help?Do you have a question about the EVS XT nano and is the answer not in the manual?
Introduction to the XTnano server and its capabilities.
Equipment designed to meet safety standards like EN 60950, IEC 950, UL 1950.
Equipment complies with EMC standards including EN 55022 and EN 61000 series.
Warning about potential radio frequency interference and mitigation steps.
FCC Part 15 compliance for digital devices and associated labels.
CE marking indicates compliance with EU directives for EMC and low voltage.
Details on the physical size and weight of the 4U rack mount mainframe.
Information on optional control devices like remote panels, keyboards, and tablets.
Details on redundant power supplies, grounding, electrical specs, and consumption.
Operating and storage conditions including temperature and humidity.
Video standards supported in SD and HD, including formats, channels, and reference.
Audio configurations, analog/digital connections, and additional specs.
Supported video codecs, license codes, and bitrate ranges.
Tables showing bandwidth and real-time channel calculations for various codecs.
Disk storage, RAID levels, and recording capacity figures in hours for different configurations.
Figures on real-time transfers for backup/restore via GbE, reference bandwidth.
Explanation of 2-line and 4-line interpolators for smooth slow motion playback.
Instructions for unpacking, ventilation, rack mounting, and board checking.
Detailed layout and functional areas of the 4U rear panel.
Information on video connection types and configurations.
Details on analog, digital audio connections, and DA-15 pinouts.
Information on RS422 ports for remote control and connector pinout.
Overview of Gigabit network, rules, and supported switches.
Details on General Purpose Input/Output connections and specifications.
Overview of XTnano server boards and their slot assignments.
Description of V3X boards, COD modules, genlock, and block diagram.
Connector assignments for V3X COD modules in SD and HD modes.
Connector assignments for V3X COD modules in HD 3D Dual Link mode.
Assignment of channels to codec boards and connectors for single/dual boards.
Function and LEDs of the audio codec board.
Description of H3X board parts, modules, and connectors.
Information on RCTL boards, disk arrays, and LED status.
Function and specifications of the MTPC board.
Details on multiviewer board connectors, LED information, and board configuration.
To Next Page
General
![Preview: EVS XT[2]](https://data.easymanua.ls/products/617905/200x200/evs-xt-2.webp)
