EVS XT Series - Disk Data Recovery; Disk Data Recovery Process

Issue
10.01.D
XT Series DISK RECORDER
–
Version 10.01 - Software Technical Reference
EVS Broadcast Equipment SA
–
October 2009
6
Note on clips compatibility:
Clips are compatible across all Multicam configurations including Super
LSM. Record trains are also compatible as long as the number of record
channels (cameras) is not decreased in LSM mode.
Ex.:
SuperLSM → 2CAM (Fx): Record trains are lost.
4CAM (Fx) → 3CAM (Cut): Record trains are compatible.
Record trains are always kept in Spotbox mode (all modes except LSM),
even when the number of record trains is reduced.
1.3 VIDEO & AUDIO CHANNEL PARAMETERS
(AVCFG)
1.3.1 INTRODUCTION
Important
Most parameters are factory preset, and should not be modified without
advice of qualified EVS staff. Improper values for some parameters will
prevent the proper operation of the system.
Please refer to the parameters’ charts for correct values (See section
1.4.8 ‘Default parameters’, on page 39).
Every application has its own set of parameters. When the user selects an
application in the EVS main menu and press F8 (Parameters), the V/A Channels
Configuration window (also called AVCFG) appears: