EVS XT Series - 1.4 MAINTENANCE MENU; 1.4.1 Advanced Parameters

XT Series DISK RECORDER - Version 10.01 - Software Technical Reference Manual Issue
10.01.D
EVS Broadcast Equipment SA
–
October 2009
21
1.4 MAINTENANCE MENU
The Maintenance menu contains various options to configure and check the
system. These options are described in details in the next sections.
To select an option, use the ↑ and ↓ keys of the keyboard to highlight the
corresponding line and press ENTER or press the key corresponding to the
character between brackets.
To go back to the Application window, press ESC on the keyboard.
1.4.1 ADVANCED PARAMETERS
Important
Most parameters are factory preset, and should not be modified without
advice of qualified EVS staff.
Improper values for some parameters will prevent the proper operation of
the system. Please refer to the parameters’ charts for correct values.
(See section 1.4.8 ‘Default parameters’, on page 39)