Need help?Do you have a question about the EVS XHub3 and is the answer not in the manual?
Details the physical dimensions and power supply specifications of the XHub3 unit.
Illustrates the dimensions and layout of the XHub3 front panel.
Illustrates the dimensions and layout of the XHub3 top panel.
Illustrates the dimensions and layout of the XHub3 left panel.
Identifies and describes all components and indicators on the front panel.
Explains the function and behavior of the front panel Status LED.
Explains the function and behavior of the front panel Speed LED.
Explains the function and behavior of the front panel Branch Status LEDs.
Describes the function of the Master/Slave switch on the front panel.
Describes the function of the Version switch on the front panel.
Identifies and describes all components and connectors on the rear panel.
Details the configuration DIP switch matrix and its settings for normal operations.
Specifies that the Link Connector is for internal EVS use only.
Explains the purpose of connecting multiple XHub units together.
Outlines the rules and guidelines for interconnecting XHub units.
Provides information on the maximum supported cable lengths for different cable types and speeds.
Explains how to determine the installed XHub3 software version using the front panel switch.
Details the compatibility between different versions of XHub and Multicam software.
Provides step-by-step instructions for upgrading the XHub3 software via USB.
To Next Page
General