AirKey system manual version 2.7 |
06/03/2024 | Subject to technical changes and misprints
In this process, the signal strength is shown on the display. Please note that
these parameters may depend on environmental factors, such as radio
traffic, etc. and may deviate for the smartphone used.
The standard range is approximately 50-70 cm, however it depends on the
manufacturer and device. For reasons of safety, EVVA recommends to
adjust the range to approximately 30 cm.
Reset all Bluetooth ranges
By tapping on Reset all Bluetooth ranges, all manually set ranges are deleted and the
standard ranges are used again. A warning message confirms that the ranges have been
reset.
6.9.4 Hands-free mode
Tick the Hands-free mode function to activate it. All other information regarding the
Hands-free mode can be found in the chapter Hands-free at a glance.
6.9.5 Unlocking from notifications
This function allows unlocking locking components using Bluetooth without opening the
AirKey app.
Tick the Unlock from notifications function to activate it.
For Android smartphones, activating this function starts a service. Even
when the AirKey app is terminated, this service permanently searches for
Bluetooth locking components within range and leads to increased battery
consumption of the smartphone. The service is terminated as soon as the
function is deactivated again. Tap on the notification of the service to go
directly to the settings of the AirKey app.
As soon as your smartphone is within range of an AirKey locking component for which you
have access authorisation, you will receive a notification on the lock screen or home screen
of your smartphone. You can then use this notification to unlock the locking component.
To Next Page
Loading...