Ewel Titano - Maintenance and Cleaning; Technical Data

MAINTENANCE
&
CLEANING
Before
carrying
out
routine
cleaning,
switch
off the fan and
disconnect mains
power.
Use a
soft, damp cloth only
and do not
use abrasive
substances.
NB:.
Do not
submerge any
part
of the fan in
the water.
Attention:
To
avoid injured,
dangerous
and damage,
please
remember
to
disconnect
the
plug
before
cleaning
and remount
the rear
guards
after
cleaning
and before
use.
ii
tn" fun is really
dirty,
you
can
detach rear
guards
and
clean inside
of the fan.
1.
screws
of the rear
guards
by a sized
screw
driver;
2.
turn the
rear
guards
counterclockwise
and
take
it
out;
3. use vacuum
cleaner to clean
the dust
or use a
damp
cloth to remove
the
dust on fan, but fan is
not
detachable
from
motor shaft
and do not uses
water
to clean
iU
4.
after
cleaning, close
the rear
guards
by turn it
TECHNICAL
DATA
Power
supply: 12 V
DC
Power:
30 W
Dimensions:
300 x 1200 x
300 mm
Weight:
3.8 kg
CAUTION
The
symbol
on the
product
means that
at the end of its life,
the
appliance
must not
be
considered normal waste
but hazardous
waste
and,
as such,
must
be disposed
of in specific recovery
and
disposal areas,
as
prescribed
by
the EC Directive
2OO2/96/EC
(WEEE).
By
disposing
of this
product
correctly,
you
can
prevent
negative
consequences for
the
environment
and for human
health,
due to the
presence
of
potentially
hazardous
substances
in
the
Droduct.
For more
detailed information
about
recycling
this
product,
contact the local
authorities, the local
waste disposal
service
or
the shop from
which the
product
was
purchased.
Unlawful
disposal will
be
punished
according
to the law.
X
I