6
5. Emergency Brake
The emergency brake mechanism
is located on the left-hand side
hand brake, and does require both
hands to engage or disengage. To
activate, start by pulling and *
holding the brake handle, then
push the emergency brake pin
downwards, and release the brake
handle before releasing the pin.
The spring actuated lock arm will automatically lock the pin in the engaged
position. To disengage, squeeze the let brake handle, push the lock arm
away from the pin, and the pin will automatically return to its original
position. This will keep the scooter stationary while not in use.
6. Kill Switch and High/Low Switch
There is a kill switch that will disable
the throttle when clicked inwards. You
can continue to use the Bluetooth
music playback without having to
worry about the throttle accidentally
being pulled. *
To Next Page
Loading...
