EWM PICO 230 - User Manual

EWM
HIGHTEC WELDING GmbH
Dr. Günter - Henle - Straße 8 • D-56271 Mündersbach
Phone: +49 2680 181 0 • Fax: +49 2680 181 244
www.ewm.de • info@ewm.de
GB
Operating instructions
Welding machines for MMA welding
PICO 230
PICO 230 CEL
PICO 260
PICO 260 CEL
PICO 260 CEL PWS
PICO 300
PICO 300 CEL
PICO 300 CEL PWS
N. B. These operating instructions must be read before commissioning.
Failure to do so may be dangerous.
Machines may only be operated by personnel who are familiar with the appropriate safety
regulations.
The machines bear the conformity mark and thus comply with the
• EC Low Voltage Directive (2006/95/ EG)
• EC EMC Directive (2004/108/ EG)
In compliance with IEC 60974, EN 60974, VDE 0544 the machines can be used in environments
with an increased electrical hazard.
© 2007 Subject to alteration.
Item No.: 099-002032-EWM01
Revised: 28.03.2007

Summary

Operating Instructions

Safety Instructions

General Safety Precautions

Essential rules to prevent accidents and ensure safe operation.

Transport and Installation Safety

Guidelines for safe handling, moving, and setting up the welding machine.

Technical Specifications

PICO 230; 230 CEL Technical Data

Detailed technical parameters for PICO 230 and 230 CEL models.

PICO 260 Series Technical Data

Detailed technical parameters for PICO 260, 260 CEL, and 260 CEL PWS.

PICO 300 Series Technical Data

Detailed technical parameters for PICO 300, 300 CEL, and 300 CEL PWS.

Machine Components and Views

Functional Characteristics

Machine Control Interface

Explanation of operating elements, displays, and buttons on the control panel.

MMA Welding Features

How to select MMA process, electrode types, hotstart, and antistick.

Advanced MMA Welding Settings

Adjusting arcforce and arc length for optimized MMA welding.

Commissioning and Setup

Initial Setup and Safety

General guidelines for safe machine placement and preparation.

Electrical and Mechanical Connections

TIG Welding Connections and Gas Supply

Maintenance and Care Procedures

Routine Cleaning and Checks

Mandatory Repetition Testing

Requirements and scope of periodic safety and functional tests.

Electrical Safety Testing

Repair and Warranty Service

Warranty Information

General Warranty Coverage

Details the duration and scope of the 3-year warranty on EWM machines.

Warranty Declaration and Exclusions

Warranty Terms and Conditions

Defines warranty terms, conditions, exclusions, and liability limitations.

Troubleshooting and Error Codes

Interpreting Machine Error Messages

Explains error codes, their causes, and recommended remedies.

EWM PICO 230 Specifications

General

Mains frequency	50/60 Hz
Mains fuse (slow-blowing)	16 A
Protection class	IP23
Insulation class	H
Power supply voltage	230 V
Setting range	10 A - 230 A