ifdown team0;ifup team0
ifdown eno2;ifup eno2
systemctl restart network
Verify that the new state activebackup is configured.
teamdctl team0 state
The status should return that one of interface links is up and the runner's active port is routing to the
interface that is up. The response should resemble:
runner:
active port: eno1
You can also verify that your throughput for one interface is up.
teamnl team0 ports
The response should resemble:
eno2: down 0Mbit HD
eno1: up 1000Mbit FD
Exabeam Appliance Network Conguration
Exabeam Appliance Setup Guide - Version SMP 2019
Published Mar 15, 2021 20
To Previous Page
Loading...