TRUNK RELEASE / CHANNEL 2: Press the TRUNK button for 3
seconds.
• THE SYSTEM WILL DISARM AND THE TRUNK WILL
OPEN (IF EQUIPPED).
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER’S CLOCK WILL READ “CH2”
AND BEEP.
Controller & Transmitter Functions (cont’d)
CHANNEL 3:
• YOUR SYSTEM WILL ACTIVATE THE CHANNEL 3 OUTPUT.
• UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE CONTROLLER WILL SHOW
“CH3” ON THE CLOCK DISPLAY.
CHANNEL 4:
• YOUR SYSTEM WILL ACTIVATE THE CHANNEL 4 OUTPUT.
• UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE CONTROLLER WILL SHOW
“CH4” ON THE CLOCK DISPLAY.
Press and release “P” then
TRUNK within 5 seconds.
Press and hold the TRUNK &
START buttons for 1 seconds.
OR
1
2
Press and release “P” twice
then TRUNK within 5 seconds.
Press and hold the LOCK &
TRUNK buttons for 1 seconds.
OR
1
2
x2
5
To Next Page
Loading...
Need help?
General
