Controller & Transmitter Functions (cont’d)
SILENT ARM / DISARM: Press and release the TRUNK button twice
in 5 seconds.
• THE PARKING LIGHTS WILL FLASH, AND THE DOORS
WILL LOCK/ARM OR UNLOCK/DISARM DEPENDING ON
THE CURRENT SYSTEM STATUS.
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL SHOW THE LOCK/ARM
OR UNLOCK/DISARM ICON.
x2
LOW VOLTAGE & HIGH/LOW TEMP AUTO START: Press and
release UNLOCK, LOCK, START within 5 seconds.
• THE SYSTEM WILL GIVE ONE CHIRP TO INDICATE
THE LOW VOLT & HIGH/LOW TEMP AUTO START IS
ACTIVATED. SEE PAGE 10 FOR MORE INFO.
• UPON RECEIVING CONFIRMATION, THE
CONTROLLER WILL CHIRP ONCE AND THE CLOCK
WILL READ “RS AUTO” EVERY 5 SECONDS.
• SEE PAGE 10 FOR FUNCTIONAL DETAILS.
3
1
2
SENSOR BYPASS: Press and release the TRUNK button within 5
seconds of locking/arming the alarm system.
• THE SYSTEM WILL GIVE ONE CHIRP TO INDICATE THE
SENSOR IS BYPASSED.
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL ALSO CHIRP ONCE &
DISPLAY THE SENSOR ICON.
1
2
CHANNEL 5:
• YOUR SYSTEM WILL ACTIVATE THE CHANNEL 5 OUTPUT.
• UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE CONTROLLER WILL SHOW
“CH5” ON THE CLOCK DISPLAY.
Press and release “P” three times
then TRUNK within 5 seconds.
Press and hold the UNLOCK &
START buttons for 1 seconds.
OR
1
2
x3
6
To Next Page
Loading...
Need help?
General
