Excell TWH3 User Manual

EXCELL PRECISION CO., LTD.
10
02029018
ZSME300000363
 Alarm Mode Settings:
Sets High Limit (weight alarm limit). Low Limit is disabled (you can be freely set
any Low Limit value without any effect). The beeper setting is 32.
3 2
A 
When weight alarm limit is reached, RelayCard (HIGHT) is activated with one
weight totalizing. When weight returns to zero, the weight alarm is deactivated (the
LCD indication is off, and RelayCard returns to normal). Totalized weight values
range from [000.000] to [999999].
 Clearing Alarm Totalized Weight Values:
 Press key followed by key, then all totalized weight values are cleared.
 When switching among weighing, counting, and alarm totalizing modes, or when
changing among the weighing units, totalized weight values are automatically
cleared.
 After turning off the electronic scale, totalized weight values are automatically
cleared.
 LCD indication:
     
  
10d Low Limit High Limit
◆ To exit preset mode, please press key.
2. Recall Check-weighing Values
Press key then press key  Recall “Low limit value”
Then press key again  Recall “High limit value”
Then press key again  Recall “Beeper value”
Then press key again  Back to the beginning
3. Clearing Check-weighing Values
Press key then press key, and then press key  Recall “Low limit value”
Then press key again  Clear “High limit value” and “Beeper value”
Press key then press key 6 times continuously  Clear all values.

Excell TWH3 Specifications

General

Brand	Excell
Model	TWH3
Category	Scales
Language	English