Excell TWH3 User Manual

EXCELL PRECISION CO., LTD.
15
02029018
ZSME300000363
Press key
Press key
Press key
Press key
3-1  Check Weighing Configurations
 If is set, accessing to is denied.
Use or key to select F4 function  the display shows
Preset “LO value”
(LO value  10d)
Press and
key to set “ LO value”
E.g. LO value = 2 kg
Preset “HI value”
(HI value  LO value)
Press and
key to set “HI value”
E.g. LO value = 2.5 kg
Preset “Beeper value”
Press and
key to set “HI value”
E.g. Beeper value = 22
.  
kg
  .
kg
Press key for 5 times
to clear HI, OK, LO values
Press key
.  
kg
key = Increase the flash value by one (from 0 to 9)
key = Confirm key
  .
kg
 
A B
A  0 = After stable, the beeper beeps, and the
indications are on.
1 = After stable, the beeper beeps; whether
stable or not, the indications are on.
2 = Whether stable or not, the beeper beeps
and the indications are on.
3 = Weight alarm mode activation: When
over High limit and stable, the indications
are on, and RelayCard is activated.
B  0 = No beep
1 = OK (when the weight is between Low limit
& High limit), the beeper beeps.
2 = When the weight is under or equal to Low
limit (must be over 10d) & over or equal
to High limit, the beeper beeps.
 LCD indication description:
     
 
10d Low limit value High limit value
.  
kg
 
kg
 
kg

Excell TWH3 Specifications

General

Brand	Excell
Model	TWH3
Category	Scales
Language	English