Excell FDH3-W - User Manual

H3 Series Weighing
Scale
User manual
© EXCELL PRECISION CO., LTD. 2022. All rights reserved worldwide.
The information contained herein is the property of EXCELL PRECISION CO., LTD. and is
supplied without liability for errors or omissions. No part may be reproduced or used except as
authorized by contract or other written permission. The copyright and the foregoing restriction
on reproduction and use extend to all media in which the information may be embodied.

Excell FDH3-W Specifications

General

Brand	Excell
Model	FDH3-W
Category	Scales
Language	English

Summary

Scale Preparation and Safety

Preparing to Use the Scale

Guidance on proper scale placement and initial setup for accurate readings.

Precautions for Use

Essential safety guidelines and environmental considerations for operating the scale.

Maintaining the Scale

Instructions for battery maintenance and general care of the weighing scale.

Safety Warnings

Critical warnings regarding battery hazards like causticity and explosion risks.

Chapter 2: General Operation

2-2 Weighing Mode

Detailed procedures for using the scale in standard weighing mode.

2-2-2 Zero Function

2-2-3 Tare Function

2-2-5 Check Weighing Mode

Chapter 3: Function Settings

F4 Check Weighing Configurations

Setting up parameters for the check weighing function: limits and beeper.

F5 RS232 Output Setting (Option)

Configuring RS232 communication modes, baud rates, and data formats.

F8 Weight Hold Mode Setting

Detailed setup for various weight hold modes, including animal scale.

Animal Scale Hold Setup (hold 4)

Configuring the scale for animal weighing with average calculation.

Animal Scale Hold Function 2 (hold 5)

Setting up the second animal scale hold mode with deviation control.

F11 ID Code Setting

Appendix 2 & 3: Hardware Interfaces

MODBUS Data Address Table