Excell FDH4-W Series - User Manual

Weighing Scale
12key
User manual
Applicable models include:*
AWH4, FDH4-W, KWH4,
SAH4-W, SBH4-W, TWH4
Series
(FW. Ver. 02029010)
*Applicable models list is subject to change without notice.
© EXCELL PRECISION CO., LTD. 2017. All rights reserved worldwide.
The information contained herein is the property of EXCELL PRECISION CO., LTD. and is
supplied without liability for errors or omissions. No part may be reproduced or used except
as authorized by contract or other written permission. The copyright and the foregoing
restriction on reproduction and use extend to all media in which the information may be
embodied.

Excell FDH4-W Series Specifications

General

Display	LCD
Auto Power Off	Yes
Power Supply	rechargeable battery
Units	kg, lb
Readability	0.1 g
Housing Material	ABS plastic

Summary

Chapter 1 Introduction

1-1 Features

Overview of the scale's key features, including A/D converter and calibration methods.

1-2 Display Description

Explanation of the scale's display segments, indicators, and unit symbols.

1-3 Keypad Functions Description

Detailed description of each key and its corresponding function on the scale's keypad.

1-4 Power Description

Information on power sources, consumption, and low power alarm indications.

1-5 Error Messages

List and explanation of various error codes displayed by the scale and their meanings.

Chapter 2 General Operation Description

2-1 Backlight Function

Instructions on how to operate and adjust the display backlight modes.

2-2 Weighing Mode

Details on weighing functions: unit selection, check weighing, totalizing, zero, and tare.

2-3 Counting Function

Guide to using the counting function, including sampling and check weighing operations.

Chapter 3 General Function Setting

3-1 F4 Check Weighing Configurations

Procedure for configuring check weighing parameters: low/high limits and beeper values.

3-2 F5 RS-232 Interface Output Setting

Setting up the RS-232 interface: transmission modes, baud rates, and data formats.

3-3 F6 Exit Function Setting Mode

Instructions on how to exit the function setting mode and return to normal operation.

3-4 F7 Internal Value Display Mode

Accessing and viewing the scale's internal operational values.

3-5 F8 Hold Mode

Configuration and operation of hold modes: peak, stable, and animal scale hold.

3-6 F11 ID Code Setting

Setting the machine ID code for RS-232 transmission and its impact on data output.

3-7 F12 Print Key Function Setting

Customizing the print key behavior for different printing scenarios and totalization.

Appendix 1 7-Segment Display Characters