Excell FDH4-W Series - Chapter 3 General Function Setting

EXCELL PRECISION CO., LTD.
14
02029010
ZSME300000363
Chapter 3 General Function Setting
 Switch on the scale. While the scale is counting down to zero, press and hold key
until the display shows the software program version number
Release the key, the scale enters into the configuration setting mode and
is showed on the display.
Press key
Press key
Press key
Press key
Press key
Press key
Press key
Press key
Press key
Press key
Press key
Press key
Press key
Press key
 Reserved
 Reserved
 Reserved
 Reserved
 Check-weighing configurations
 RS-232 Interface output Setting
 Exit setting mode
 Internal value display mode
 Hold mode
 Reserved
 Reserved
 ID code setting
 Print key ( ) function setting
 Reserved
 Reserved
 Reserved