EXCELL PRECISION CO., LTD.
0201813X ZSME300000366
Range 2 and Range 1 and the two symbol indications are off.
2-3-2 Check Weighing
Refer to the operation of check weighing in weighing function.
2-3-3 Totalizing
Refer to the operation of totalizing in weighing function.
Chapter 3 General Function Setting
Switch on the scale. While the scale is counting down to zero, press and hold key until
the display shows the software version number 02018. Release the key, the scale
enters into the configuration setting mode and display F0.
/ key ⇒ upward key
key ⇒ downward key
key ⇒ to confirm
Check Weighing Configurations
RS232 Output Setting (Option)
Internal Value Display Mode
Print Key Function Setting
Customized Header Setting
(r n P 6, r n P 7)
F0~F3, F9, F10, F13, F15 are reserved.
To Next Page
Loading...
Need help?
General
