EXCELL PRECISION CO., LTD.
0201813X ZSME300000366
Chapter 2 General Operation Description
2-1 Backlight Function
Press key to select the display backlight mode:
bL. Auto
“Auto Backlight” mode. When the weight is over 10d or any key is pressed, the
display backlight will be switched on. When the weight returns to zero (the weight on
platform is less than 10d), the display backlight will switch off after 10 seconds.
bL. On
Display backlight is on all the time.
bL. oFF
Display backlight is off.
2-2 Weighing Mode
2-2-1 Units Selection (not available in 4 key model)
1. After indicator is turned on, use UNITS key to select a unit from kg, lb, tael or viss, as
the screen indicated.
2. The selected unit will be memorized when you turn the indicator off. And the
memorized unit will appear after you turn on the indicator next time.
2-2-2 Zero Function
Press key to re-zero the display with no load on the platter. When zero is set, the
( ) symbol will be displayed.
2-2-3 Tare Function
1.
When the weight of the container is unknown
( )
Place the container on the platter, after stable and press
key, the weight value
returns to zero and net indication ( ) is on.
Place goods into the container, then the indicator shows the net weight of goods.
Clear tare value
When removing the container and goods, the display shows the negative weight value
of the container. Then press key to clear tare value. The indicator returns to
zero and net indication ( ) is on.
Recall tare value
Press then
key
the display shows tare value
Multiple tare operation
Users can continuously increase or decrease the tare value by
pressing the
key.
The total tare value (tare value + pre-set tare value) can equal the full capacity of the
indicator.
2.
When the weight of the container is known
( )
Press
key and the display shows
.
.
Use and keys to input weight value of the container. After finishing the
procedures, the net indication
( )
and pretare (PT) indication “
” is on.
Place goods into the container, then the indicator shows the net weight of goods.
Clear pretare value
Press then key, and then press key to clear pretare value.
When indicator returns to zero, net indication ( ) and pretare (PT) indication “
” are
To Next Page
Loading...
Need help?
General
