EXCELL PRECISION CO., LTD.
Then the printing form is:
FR”WT3N ”
?
1,200
0,700
0,300
0,200
20
000020001000000020
P1,1
Use + key or key twice to clear the format
Then the printing-clearing form is:
FR”520T ”
?
1
0,200
20
000001000200000020
P1,1
Print after Removing Goods (5% mode)
1: Goods placed
and weighed on
platter
Weight has become stable.
Weight > zero point
Weight ≥ 20 weighing units
(i.e. 5% x Weight ≥ 1 weighing unit)
Beeper beeps twice, and
printing data (stable weight
compliant with conditions on
the left) is ready to be sent.
2: Just removed
goods from platter
Instantaneous weight reading drops
below 95% of last stable weight (stable
weight of Stage 1)
Printing data of Stage 1 is
sent to the printer (same
printing formats as those of
).
Print after Removing Goods (OK mode)
1: Goods placed
and weighed on
platter
Weight has become stable.
Weight > zero point
Check weighing OK status (within a
predetermined weight range)
Beeper beeps twice, and
printing data (stable weight
compliant with conditions on
the left) is ready to be sent.
2: Just removed
goods from platter
Instantaneous weight reading drops
below 95% of last stable weight (stable
weight of Stage 1).
Printing data of Stage 1 is
sent to the printer (same
printing formats as those of
).
To Next Page
Loading...
Need help?
General
